How to load firmware files | 3 Ways3 ways

There are 3 main ways to load firmware on iConnectivity interfaces.

1) If you have a mio X Series interface (XM / XL) - Downgrade to Auracle X v 1.8.1 (Windows) and try through that version under the firmware tab.
2) If you are on Mac using Auracle X 1.8.4 or 1.8.5 please upgrade to Auracle X 1.8.6 to properly load firmware. Click on the firmware page and select install.
Download Here
3) MIDI Player Software
- MIDI OX (windows) - Shown below in video and written form
- SysEx Librarian (Mac) - Shown in video below and written form
4) Using a DAW - Link to video at bottom of page.

LOADING FIRMWARE WITH MIDI OX

Put the interface into bootloader mode: https://iconnectivity.supportbee.com/53/117/4355

Download MIDI OX : http://www.midiox.com/

Open MIDI OX

Select Actions > Play MIDI...

A new MIDI player window will open

Select the folder icon      

Select the firmware (.mid) file you've downloaded from the iConnectivity website for your interface.
https://www.iconnectivity.com/firmware

Now select the MIDI button  

This should open a new window showing the MIDI ports connected to your computer.

Select the interface in bootloader mode.  

Select OK

Click the Play button >

Once file is fully played power your interface off then back on by disconnecting and reconnecting the power OR pressing and holding the knob/button on your interface until the lights go out and then click again to turn it back on.

Loading firmware with a DAW - https://youtu.be/0zoWMYLadzg

---

LOADING FIRMWARE WITH SYSEX LIRBARIAN

Use the dropdown list to select the interface in Bootloader Mode.

Drag your downloaded firmware file into the window.

Select "Play"

When the file has played completely through (time varies upon program and settings), reset your interface:

Button Series (mio & MIDI) --> Press and hold button until no lights are on.

Knob Series (AUDIO) --> Press and hold knob until no lights are on (after red lights in top of meter).