Problems updating firmware on mio10

If you are having trouble automatically updating your mio10 with the iConfig software, simply follow this procedure:

  1. Disconnect your computer from the mio10
  2. Switch off the mio10
  3. Power up the mio10
  4. Connect rear mio10 USB port to computer
  5. Run the iConfig software
  6. If iConfig gives you an error message when it tries to update automatically, press the ESC key to dismiss the error message
  7. Go to the Device menu and select Reset to Bootloader Mode
  8. iConfig should detect the mio10 in bootloader mode and ask if you want to update the firmware
Rodney Orpheusmio10